Emulex LP982 Manual de usuario Pagina 172
- Pagina / 371
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Driver is Not Loaded after System Reboot
After Upgrading The Kernel
Situation:
The driver is not loaded when the system is rebooted after upgrading the kernel.
Resolution:
There are two ways to install the driver into an upgraded kernel. The method you use
depends on whether or not you are upgrading the driver.
● You can upgrade the kernel using the same version of the driver.
● You can upgrade the kernel using a new version of the driver.
To upgrade the kernel with the same version of the lpfc driver kit installed:
1. Copy the /etc/lpfc.conf file to a safe location; for example, to /etc/lpfc.conf.backup.
Type:
cp /etc/lpfc.conf /etc/lpfc.conf.backup
2. Uninstall the Emulex driver. Type:
lpfc-install --uninstall
3. Upgrade the kernel and/or distribution.
4. Reboot the system with the new kernel.
5. Re-install the Emulex driver with the lpfc.conf file; to use the previous example, /etc/
lpfc.conf.backup. Type:
lpfc-install -c /etc/lpfc.conf.backup
6. Reboot the system to complete re-installation of the Emulex drivers.
Emulex Documentation, Drivers and Software
172
- Version 7.1 1
- Table of Contents 1
- Supported Features 2
- New Features in this Release 3
- Known Issues 7
- Use HBAnyware 10
- Use lputilnt or lputil64 12
- Use lputil 13
- Use lp6dutil 15
- Driver Information 18
- ❍ LP8000 and LP8000DC 19
- ./ioctl-install 20
- Directory Structure 22
- ./ioctl-install --uninstall 24
- Installing the Driver Kit 25
- ./lpfc-install --uninstall 26
- ./lpfc-install 26
- Upgrading the Kernel 29
- Installing the Utilities 39
- Configurator 40
- Start HBAnyware for Linux 45
- The Toolbar 47
- The Discovery Tree 48
- Property Tabs 50
- Status Bar 50
- Using the CLI Client 51
- CLI Client Command Reference 51
- Start lputil 58
- Discover HBAs - Introduction 59
- Discover HBAs Using HBAnyware 60
- List Adapters using lputil 61
- Reset Adapter - Introduction 62
- Reset HBAs Using HBAnyware 63
- Reset Adapter Using lputil 64
- Display HBAs 67
- Display Local HBAs Only 68
- View Discovered Elements 69
- View Host Attributes 70
- View Fabric Attributes 72
- View Target Attributes 73
- View LUN Attributes 75
- View General HBA Attributes 77
- Link Status Area 78
- View Detailed HBA Attributes 79
- View Port Attributes 81
- View Port Statistics 83
- ● Assign AL_PA IDs 84
- Load Firmware Using HBAnyware 89
- Details tab 90
- Boot Bios Field Descriptions 91
- Update Firmware 92
- FC Boot 93
- Update BootBIOS 94
- Enable BootBIOS Message 95
- (lputil) 96
- Load EFIBoot Using HBAnyware 97
- Boot the EFI System 99
- Configuring the Driver 100
- Reset All Default Values 104
- ● Permanently (global) 105
- ● Temporary (global) 105
- ● Temporary (per adapter) 105
- Creating a New Ramdisk Image 109
- Set Up LUN Support 110
- Understand Device Numbering 113
- Download PCI Configuration 114
- To show persistent names: 122
- # devlabel status 122
- View Target Mapping 123
- Set Up Persistent Binding 124
- HBAnyware Security Overview 128
- /usr/sbin/hbanyware/ssc 129
- Create the ACG 130
- 5. Click OK or Apply 131
- Designate an MSC 132
- ACG Icons 134
- Add a Server to the ACG 137
- Delete a Server from the ACG 138
- Generate New Security Keys 141
- Configuration 142
- Access a Switch 143
- ASG Icons 144
- Create an ASG 146
- Reserved Indices - Examples 148
- Add a Server to an ASG 149
- Deleting an ASG 150
- Edit an ASG 152
- About Offline ASGs 154
- Backup Masters - Introduction 155
- Create a Backup Master 157
- Introduction 164
- Driver Install Fails 165
- ./stop_hbanyware 166
- Custom Built Kernel 171
- After Upgrading The Kernel 172
- Driver Uninstall Fails 174
- Cannot Install HBAnyware 176
- Run HBAnyware 182
- Cannot See Any HBAs 183
- Management Server 185
- SAN Management Workstation 186
- Does Not Have 186
- Cannot See New LUNs 187
- All Servers Are Not Displayed 190
- Cannot Add or Remove a Server 191
- Cannot Create a Backup Master 198
- Available 200
- Client Assigned" 205
- Unsecure System" 206
- Master Client System" 207
- Connect to the FC Network 208
- Were Offline 209
- ELS Events (0100 - 0199) 215
- Mailbox Events (0300 - 0399) 253
- ❍ Reduce the LUN size 342
- Link Events (1300 - 1399) 363
- SLI Events (1400 - 1499) 367
Relacionado con productos y manuales para Software Emulex LP982
Software Emulex LP21000 Manual de usuario
(274 paginas)
(274 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.165 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales