Emulex LP21000 Manual de usuario descargar pdf (Pagina 251)

The OneCommand Manager User Manual Page 241

CnaGetEventLog

Supported by: Windows, Linux and VMware ESX

Syntax:

hbacmd CnaGetEventLog <WWPN|MAC>

Description: This command shows the CNA event log specified by the WWPN or MAC address.

Parameters:

WWPN: Adapter’s WWPN port

MAC - MAC address of the NIC or iSCSI port

Download

Supported by: Windows, Solaris, Linux and VMware ESX

Syntax:

hbacmd Download <WWPN|MAC> <FileName>

Description: Loads the firmware image to the FC or CNA port specified by the WWPN or MAC address.

Parameters:

WWPN - Port’s WWPN

MAC - The MAC address of the NIC or iSCSI port

FileName - The name and location of the firmware image (any file accessible to the CLI client)

ExportSANInfo

Supported by: Windows, Solaris Linux and VMware ESX

Syntax:

hbacmd ExportSANInfo [format]

Note: Supported for OneConnect adapters only.

Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to

the command. The default CIM credentials must be set using the SetCimCred

command. See “SetCimCred” on page 244.

Note: For OneConnect adapters, while the WWPN or MAC address is used to identify

the adapter, the updated firmware applies to all ports on that adapter. It is not

necessary to download the firmware on all the adapter ports of a OneConnect

adapter.

Note: Emulex recommends that you redirect this output to a file with proper

extension, '.xml' for XML-formatted files and '.csv' for CSV-formatted files.

Note: Due to the amount of information that must be obtained and reported, this

command can take a long time on large SAN configurations.

1 2 ... 246 247 248 249 250 251 252 253 254 255 256 ... 273 274

Sin comentarios

Emulex LP21000 Manual de usuario Pagina 251