Emulex LP21000 Manual de usuario descargar pdf (Pagina 254)

The OneCommand Manager User Manual Page 244

RemoveHost

Supported by: Windows, Solaris, Linux and VMware ESX

Syntax:

hbacmd RemoveHost host_address

Description: This command removes a host from the hosts file use for TCP/IP management in the

OneCommand Manager application GUI. The host_address can be an IP address, using the IPv4 or

IPv6 format, or a host name.

Parameters:

host_address - Host to remove

Reset

Supported by: Windows, Solaris, Linux and VMware ESX

Syntax:

hbacmd Reset <WWPN>

Description: This command resets the adapter. An adapter reset can require several seconds to

complete, especially for remote devices. When the reset is completed, the system command prompt is

displayed.

Parameters:

WWPN - Adapter’s WWPN

SetCimCred

Supported by: VMware

Syntax:

hbacmd SetCimCred <username> <password> <namespace> <portnum>

Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to

the command. The default CIM credentials must be set using the SetCimCred

command. See “SetCimCred” on page 244.

Note: Supported only for FC and FCoE ports. Not supported for NIC and iSCSI ports.

Note: For OneConnect FCoE ports, this command only resets the driver to update

changed driver parameters that require a driver reset. It does not cause a hardware

reset of the adapter port.

Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to

the command. The default CIM credentials must be set using the SetCimCred

command. See “SetCimCred” on page 244.

Note: Use this command to set only the CIM credentials. Once this is done,

subsequent hbacmd commands do not require you to specify the CIM credentials in

the command line.

1 2 ... 249 250 251 252 253 254 255 256 257 258 259 ... 273 274

Sin comentarios

Emulex LP21000 Manual de usuario Pagina 254