Emulex OneConnect OCe14000-Series Manual de usuario descargar pdf (Pagina 6)

6 CONNECT | VMware vSphere 5.5 VXLAN Networking and Emulex OneConnect® OCe14000 Ethernet Adapters

CONNECT  DEPLOYMENT GUIDE

3.0 Deploying Emulex OneConnect Adapters in ESXi 5.5 hosts

ESX Host and System Enablement

1. Install the OneConnect Ethernet adapter in an available PCIe 3.0 x8 slot

2. Power up the server

3. Enter the server’s BIOS setup and make sure the virtualization technology, Intel® VT-d, is enabled on the server

4. Install VMware ESXi 5.5i Enterprise Plus on the server

5. Install VMware vCenter Server 5.5

6. Deploy Virtual Machines

7. If required, install latest version of Emulex driver and ﬁrmware

Note—For details on installing VMware vSphere 5.5 and other components refer to VMWare documentation:

http://pubs.vmware.com/vsphere-55/index.jsp#com.vmware.vsphere.install.doc/GUID-BC044F6C-4733-4413-87E6-A00D3BDEDE58.html

3.1 VXLAN prerequisites

You can conﬁgure your environment using VMware vSphere Client or vSphere Web Client. During the initial VXLAN installation, you will

have to login and conﬁgure settings in vShield manager. It is highly recommended to deploy a DHCP server in your physical network in so

that your ESX host VTEP interfaces can request and receive an IP address. As a prerequisite to conﬁguring VXLAN networking, you must

ﬁrst do the following:

1. Create Clusters

2. Add ESX hosts to Clusters

3. Create a VMware vSphere Distributed Switch (VDS)

4. Conﬁgure VMware vShield Manager Appliance

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Sin comentarios

Emulex OneConnect OCe14000-Series Manual de usuario Pagina 6