Emulex LightPulse LPe1105-M4 HBA Guía de instalación Pagina 76

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 182
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 75
76
EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux Environment
Installing and Configuring the Linux Host with the Emulex Driver
Creating symlink /var/lib/dkms/lpfcdfc/1.0.13/source ->
/usr/src/lpfcdfc-1.0.13
DKMS: add Completed.
Preparing kernel 2.4.21-27.0.1.ELsmp for module build:
(This is not compiling a kernel, only just preparing kernel symbols)
Storing current .config to be restored when complete
Running Red Hat style preparation routine
make clean....
using
/lib/modules/2.4.21-27.0.1.ELsmp/build/configs/kernel-2.4.21-i686-smp.config
make oldconfig.....
running dkms_mkkerneldoth....
Building module:
cleaning build area....
make KERNELRELEASE=2.4.21-27.0.1.ELsmp INC_TOP=/usr/src/lpfc-7.1.14......
cleaning build area....
DKMS: build Completed.
Running module version sanity check.
lpfcdfc.o:
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/2.4.21-27.0.1.ELsmp/kernel/drivers/scsi/lpfc/
depmod....
DKMS: install Completed.
* Done : Step 1: The ioctl module has been compiled and installed under
/lib/modules
************************************************************
* The Emulex DFC module has been installed on your system. *
************************************************************
5. Use the DKMS command to verify that the drivers have been
built and installed successfully.
For example:
[root@l82bi250 /]# dkms status
lpfc, 7.1.14, 2.4.21-27.0.1.ELsmp, i686: installed (original_module exists)
lpfcdfc, 1.0.13, 2.4.21-27.0.1.ELsmp, i686: installed
6. Reboot the host.
Caveat
If the
lpfcdfc driver is loaded, then it must be unloaded prior to the
lpfc driver.
Vista de pagina 75
1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 181 182

Comentarios a estos manuales

Sin comentarios