Emulex LightPulse LPe1105-M4 HBA Guía de instalación descargar pdf (Pagina 84)

EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux Environment

Installing and Configuring the Linux Host with the Emulex Driver

Installing the Emulex HBAnywhere applications kit

IMPORTANT

The lpfc driver must be installed first, because HBAnyware is

dependent upon the existence of the lpfc driver.

Note: There is a one-to-one relationship between versions of the lpfc driver

and the versions of the applications kit. For example, for the 8.0.16.6_x2 lpfc

driver the application kit is ElxLinuxApps-2.1a8-8.0.16.4-1.tar. You will find

the appropriate application kit located on the same page as the driver on the

EMC-approved web page at the Emulex website.

Note: As of RHEL5, OEL 5, and Asianux 3.0, the Emulex 8.1.10.x

driver/application combination requires the netlink library for event

handling. RHEL5, OEL 5, and Asianux 3.0, by default, installs only the 64 bit

netlink library on 64 bit architectures (IA64 and PPC64). HBAnyware

provides both 32 and 64 bit libraries and on install will report a dependency

error for the 32 bit library because the 32 bit netlink library is not present. The

following message appears:

32-bit DFC library failed to install. Verify operating

system is configured with 32-bit development/library s/w

support. HBAnyware utilities not affected by this failure

as they are 64-bit applications.

32 bit applications, like SMI-S and others that rely on the HBA API

component of HBAnyware, will need to install the 32 bit netlink library

(available on the RHEL5, OEL 5, and Asianux 3.0 CDs) following the Emulex

ReadMe notes.

To install the Emulex HBAnywhere applications kit:

1. Create a directory to which the application kit will be saved.

mkdir /home/emulex_apps

2. Download the Applications Kit Applications Kit, and the

associated HBAnyware User Manual, from the Emulex website

and save it to the newly created directory. Refer to the HBAnyware

User Manual for any operating system requirements needed to

complete this installation.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 181 182

Sin comentarios

Emulex LightPulse LPe1105-M4 HBA Guía de instalación Pagina 84