Emulex StorageTek 4 Gb FC Host Bus Guía de instalación descargar pdf (Pagina 36)

34 Sun Blade X6270 Server Module Product Notes • December 2009

6851222 SIA Does Not Include Drivers for the Sun Blade 6000 Virtualized Multi-Fabric

10GbE Network Express Module

Issue:

When SIA is used to install an operating system to the Sun Blade X6270 Server

Module in a chassis which contains a Sun Blade 6000 Virtualized Multi-Fabric

10GbE Network Express Module, drivers for this device are not installed.

Note - If you are installing Windows Server 2003, the "Found New Hardware

Wizard" might run at the first login.

Affected Operating Systems and Software:

• Windows Server 2003 and 2008

• Red Hat Enterprise Linux (RHEL) 4.7, 5.1, 5.2, 5.3

• SUSE Linux Enterprise Server SLES (SLES) 10 SP2

• Supplemental Software Releases 1.0, 1.1, 1.4, 2.0, 2.0.1, 2.1

Workaround:

Manually install the driver, which can be found by downloading the Sun Blade

6000 Virtualized Multi-Fabric 10GbE Network Express Module Tools and Drivers

CD from http://www.sun.com/servers/blades/downloads.jsp

6798618

6800204

6806734

6813789

Blue Error Screen Might Appear When Option for Automatic SIA Updates Is

Not Selected

Issue:

If you are using SIA to install Windows Server 2008 to the Sun Blade X6270

Server Module and you opted out of the automatic SIA update, then your

installation might fail and a Blue Screen might appear with a bug check.

Affected Operating Systems and Software:

• Windows Server 2008

• Supplemental Software Releases 1.0, 1.1, 1.4, 2.0, 2.0.1, 2.1

Workaround:

Perform one of the following workarounds for this issue:

• Restart the SIA installation and accept the option for automatic SIA updates.

• Disable ACHI mode in the BIOS Setup Utility and restart installation. Follow

these steps:

1. In the Advanced menu of the BIOS Setup Utility, select On-board SATA

Configuration and press Enter.

2. Select the option for Configure SATA#1 and press Enter.

A tab appears listing the available options.

3. In the tab, select the option for IDE and press Enter.

4. To save the changes and exit the BIOS Setup Utility, press F10.

5. Install Windows 2008 directly from the installation media.

TABLE 15 Sun Installation Assistant (SIA) Known Issues (Continued)

CR Description

1 2 ... 31 32 33 34 35 36 37 38

Comentarios a estos manuales

Sin comentarios

Emulex StorageTek 4 Gb FC Host Bus Guía de instalación Pagina 36

Comentarios a estos manuales