Emulex LP1005DC-CM2 Manual de usuario descargar pdf (Pagina 53)

Driver for Linux - Configuration Section Page 47

4. On the Firmware tab, click the Update Firmware button. The HBAnyware Firmware

Download dialog box is displayed.

Figure 23: The HBAnyware Firmware Download dialog box

5. Click Browse. The Firmware File Selection dialog box appears. Select the firmware file to

download and click OK. The HBAnyware Firmware Download dialog box reappears.

6. Click Start Download. A status bar displays the progress of the download. During this time the

host bus adapter (or adapters) in the discovery tree is displayed in red text, indicating that it is

offline. It is displayed in black text when the update is complete.

If you are updating the firmware on a dual-channel HBA, repeat steps 2 through 5 to update the firmware

on the second port or use the “Batch Firmware Download” procedure on page 47.

Load Firmware (Batch Mode) Using HBAnyware

Downloading firmware in batch mode allows you to install firmware on multiple HBAs in a single step.

Batch firmware loading is restricted to a single firmware file.

Prerequisites

• The firmware file has been downloaded from the Emulex Web site and extracted to the Emulex

Repository folder (RMRepository). This folder is in /usr/sbin/HBAnyware/RMRepository.

Procedure

To load firmware (batch mode) using HBAnyware:

1. From the menu bar, select Batch and click Download.

Note: If the state of the message on the board has changed, this change will be reflected

immediately on the Details tab.

Note: No other HBAnyware functions can be performed while batch firmware loading is in progress.

Note: You do not need to select a particular tree element for this operation.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 161 162

Sin comentarios

Emulex LP1005DC-CM2 Manual de usuario Pagina 53