Emulex ONECONNECT OCE10102-F Guía de usuario descargar pdf (Pagina 10)

The following shows an example of this.

Host name Server#1

IP Address 192.168.0.10

Physical slot

name

Converged Network Adapter

card WWN

Instance name Physical address Cable tag

slot0 10 00 00 00 C9 D0 43 DD CD4C0000 SERV1_SLOT0 to SWITCH_1_port0

Details of contents

The details of contents for the WWN instance management table for the server are as follows:

Host name:

Record the host name.

IP Address:

Record the IP address of the server.

Physical slot name:

Record the slot position of installed Converged Network Adapter card.

Converged Network Adapter card WWN:

Record the value of [Port Name].

Instance name:

Not necessary to record.

Physical address:

Record the value of [Mem Base].

Cable tag:

Record a tag name which indicates the connection path (relationship between the connected device

and the port).

6 Press the [Esc] key to quit the Emulex OneConnect FCoE BIOS Utility.

When installing two or more Converged Network Adapter cards to the server, first turn off the server,

then repeat Step 1

through Step 5 shown here for each Converged Network Adapter card to be installed.

Chapter 1 Setup Procedure for Emulex Converged Network Adapter Cards

1.2 Setting Up the Converged Network Adapter Cards

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

(FCoE) for VMware

ESX

P3AM-4772-10ENZ0

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Sin comentarios

Emulex ONECONNECT OCE10102-F Guía de usuario Pagina 10