Emulex ONECONNECT OCE10102-F Guía de usuario descargar pdf (Pagina 11)

If multiple Converged Network Adapter cards are already installed in the server at the time of pur-

chase, the one-to-one relationship between the WWNs and the Converged Network Adapter cards

cannot be recognized. The WWNs that are obtained in this section may need to be repeatedly regis-

tered and set up on the ETERNUS DX until a server recognizes the ETERNUS DX logical disks.

For details about ETERNUS DX settings, refer to the following manuals.

• "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) ETERNUS

DX60 S3/DX100 S3/DX200 S3, ETERNUS DX500 S3/DX600 S3 Disk Storage Systems, ETERNUS

DX200F All Flash Array Settings"

• "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) ETERNUS

DX80 S2/DX90 S2, ETERNUS DX410 S2/DX440 S2, ETERNUS DX8100 S2/DX8700 S2 Disk Storage Sys-

tem Settings"

• "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) ETERNUS

DX60/DX60 S2, DX80, DX90 Disk Storage System Settings

• "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) ETERNUS

DX400/DX8000 series Disk Storage System Settings"

• "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (FCoE) ETERNUS DX100 S3/

DX200 S3, ETERNUS DX500 S3/DX600 S3 Disk Storage System Settings"

• "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (FCoE) ETERNUS DX80 S2/

DX90 S2, ETERNUS DX410 S2/DX440 S2, ETERNUS DX8100 S2/DX8700 S2 Disk Storage System Set-

tings"

1.2.2 Setting Up SAN Boot

The following describes the procedure when performing SAN Boot.

Depending on the Converged Network Adapter card used, the actual on-screen Converged Network Adapt-

er card information may differ from that in the screenshots shown in this manual.

1 Turn on the server, and press the [Alt] + [E] keys while the following message is displayed.

Emulex OneConnect FCoE BIOS Utility starts.

!!! Emulex OneConnect FCoE BIOS !!! , Version xxxxxxxx

Press <Alt E> or <Ctrl E> to enter Emulex BIOS configuration.

utility. Press <s> to skip Emulex BIOS

Chapter 1 Setup Procedure for Emulex Converged Network Adapter Cards

1.2 Setting Up the Converged Network Adapter Cards

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

(FCoE) for VMware

ESX

P3AM-4772-10ENZ0

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Sin comentarios

Emulex ONECONNECT OCE10102-F Guía de usuario Pagina 11