Emulex ONECONNECT OCE10102-F Guía de usuario descargar pdf (Pagina 15)

8 A list of the WWPNs and recognized LUNs (as device names) of the connected ETERNUS DX400 series is

displayed. Input the number of the device that is to be used for SAN Booting and press the [Enter] key.

Select "01" in this example.

-------------------------------------------------------------------------------

Emulex OneConnect FCoE BIOS Utility, xxxxxxxx

-------------------------------------------------------------------------------

01: OCexxxxx-F: Bus#: xx Dev#: xx Func#: xx

Mem Base: CD4C0000 Firmware Version: xxx.xxx BIOS: Enabled!

Port Name: xxxxxxxx xxxxxxxx Node Name: xxxxxxxx xxxxxxxx

Vlan ID: xxxx DCBX mode: CEE mode

-------------------------------------------------------------------------------

00. Clear selected boot entry!!

01. DID:xxxxxx WWPN:2040000B 5D6A0012 LUN:00 FUJITSU ETERNUS_DX400 0000

Enter <ESC> to Exit <PageDn> to NextPage

/ > to Highlight, <Enter> to Select

-------------------------------------------------------------------------------

===> 01

9 Input the starting LUN as a two-digit hexadecimal number and press the [Enter] key.

Input "00" in this example.

---------------------------------------------------

DID:xxxxxx WWPN:xxxxxxxx xxxxxxxx

Enter two digits of starting LUN (Hex): 00

<ESC> to Previous Menu

---------------------------------------------------

===> 00 -> Enter

10 Select a boot device startup method (via WWPN or via DID). From the list of LUNs recognized by the

device, select the LUN number whose setting is to be changed, input the number for "Enter a Selec-

tion:"and press the [Enter] key.

LUN: 00 is used for SAN Booting, so input "01" and press the [Enter] key in this example.

-------------------------------------------------------------------------------

Emulex OneConnect FCoE BIOS Utility, xxxxxxxx

-------------------------------------------------------------------------------

01: OCexxxxx-F: Bus#: xx Dev#: xx Func#: xx

Mem Base: CD4C0000 Firmware Version: xxx.xxx BIOS: Enabled!

Port Name: xxxxxxxx xxxxxxxx Node Name: xxxxxxxx xxxxxxxx

Vlan ID: xxxx DCBX mode: CEE mode

-------------------------------------------------------------------------------

DID:xxxxxx WWPN:xxxxxxxx xxxxxxxx

01. LUN:00 FUJITSU ETERNUS_DX400 0000

Enter <ESC> to Exit <PageDn> to NextPage

/ > to Highlight, <Enter> to Select

-------------------------------------------------------------------------------

===> 01

Chapter 1 Setup Procedure for Emulex Converged Network Adapter Cards

1.2 Setting Up the Converged Network Adapter Cards

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

(FCoE) for VMware

ESX

P3AM-4772-10ENZ0

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Comentarios a estos manuales

Sin comentarios

Emulex ONECONNECT OCE10102-F Guía de usuario Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Emulex ONECONNECT OCE10102-F