Emulex ONECONNECT OCE10102-F Guía de usuario descargar pdf (Pagina 28)

4 Check the values for each parameter.

Selectable Boot Settings

Selectable Boot:

(Primary) Boot Port Name, Lun:

Boot Port Name, Lun:

Press “C” to clear a Boot Port Name entry

Enabled

500000E0D4010590, 0

0000000000000000, 0

Parameter Setting value Remarks

Selectable Boot Enabled or Disabled

• Set [Enabled] for SAN Boot.

• Set [Disabled] for non SAN Boot.

Boot Port Name, Lun ETERNUS DX port WWN, LUN#

or 0000000000000000, 0

• The boot path (

ETERNUS DX port WWN)

and boot LUN# for SAN Boot are separated

by a comma.

• "0000000000000000, 0" for non SAN

Boot.

5 Return to the [Configuration Settings] menu by pressing the [Esc] key.

6 Press the [Esc] key twice to return to the [Fast!UTIL Options] menu.

If the settings were changed, save the settings using [Save xxxxxx].

When two or more Converged Network Adapter cards are installed in the server, select the second or

later Converged Network Adapter card using the following steps, and set the selected card.

(1) Select [Select Host Adapter] from the [Fast!UTIL Options] menu and press the [Enter] key.

Fast!UTIL Options

Configuration Settings

Scan Fibre Devices

Fibre Disk Utility

Loopback Data Test

Select Host Adapter

Exit Fast!UTIL

Fast!UTIL Options

(2) Select the Converged Network Adapter card to be set (BIOS setting).

Adapter Type

QLE8142 5800 05 04 00 2

QLE8142 5C00 05 04 00 3

Address Slot Bus Device Function

Select Host Adapter

(3) The [Fast!UTIL Options] menu appears. Then perform Step 1 through Step 6.

7 Select [Exit Fast!UTIL] and press the [Enter] key.

Chapter 2 Setup Procedure for QLogic Converged Network Adapter Cards

2.2 Setting Up the Converged Network Adapter Cards

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

(FCoE) for VMware

ESX

P3AM-4772-10ENZ0

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Comentarios a estos manuales

Sin comentarios

Emulex ONECONNECT OCE10102-F Guía de usuario Pagina 28

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Emulex ONECONNECT OCE10102-F