Emulex ONECONNECT OCE10102-F Guía de usuario descargar pdf (Pagina 18)

*1: Recommended value = 512 ¸ (number of FCoE ports that are connected to a single CA port) ¸

number of LUNs

(Round the result down)

Use the value of "8" if the actual result is lower.

When the value for this setting is changed, refer to "FUJITSU Storage ETERNUS DX Configuration

Guide -Server Connection- (FCoE) for VMware

ESX" and change the setting value for the Maximum

Outstanding Disk Requests for virtual machines as well.

Use the following command to change the setting values when the driver parameter name is

"lpfcX_lun_queue_depth", the number of I/Os is "8", the module name is "lpfc", and the number of ports

is "2".

# esxcli system module parameters set -p "lpfc0_lun_queue_depth=8 lpfc1_lun_queue_depth=8" -m lpfc

Input the number of I/Os ("8" in this example) for each driver parameter setting.

5 Reboot VMware ESXi.

# reboot

6 After rebooting VMware ESXi, check the setting values.

~ # esxcli system module parameters list -m lpfc | grep lpfc[0-1]_lun_queue_depth

lpfc0_lun_queue_depth int 8 Max number of FCP commands we can queue to a specific LUN

lpfc1_lun_queue_depth int 8 Max number of FCP commands we can queue to a specific LUN

Chapter 1 Setup Procedure for Emulex Converged Network Adapter Cards

1.2 Setting Up the Converged Network Adapter Cards

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

(FCoE) for VMware

ESX

P3AM-4772-10ENZ0

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Sin comentarios

Emulex ONECONNECT OCE10102-F Guía de usuario Pagina 18