Emulex ONECONNECT OCE10102-F Guía de usuario descargar pdf (Pagina 17)

1.2.3 Installing VMware ESX

•

VMware ESX should be installed now if it has not yet been installed in the server. Refer to the following

URL for details.

http://www.vmware.com/support/pubs

•

Converged Network Adapter card driver should be downloaded and installed from the following URL:

https://my.vmware.com/web/vmware/downloads

1.2.4 Setting Up the Converged Network Adapter Card Driver

Change the parameters for the Converged Network Adapter card driver.

1.2.4.1 For VMware vSphere 5.5

1 Record the module name for the Converged Network Adapter card that is loaded into VMware ESXi.

The underlined portion indicates the loaded module name. In the following example, "lpfc" is the mod-

ule name.

# esxcli system module list | grep lpfc

lpfc true true

Module names may vary depending on the Converged Network Adapter card that is used.

2 Check the number of ports on the Converged Network Adapter card.

The number of CNA Names for the Converged Network Adapter card that is displayed represents the

number of ports.

In the following example, the number of ports is "two" since "vmhba1" and "vmhba2" (two underlined

portions) are displayed as the CNA Names of the card.

# esxcfg-scsidevs -a | grep lpfc

vmhba1 lpfc link-up fc.20000000c98df7c4:10000000c98df7c4 (0:2:0.0) ServerEngines Corporation E

mulex OneConnect OCe11100 10GbE, FCoE UCNA

vmhba2 lpfc link-up fc.20000000c98df7c5:10000000c98df7c5 (0:2:0.1) ServerEngines Corporation E

mulex OneConnect OCe11100 10GbE, FCoE UCNA

3 Check the default value for the Converged Network Adapter card.

Specify the module name for the Converged Network Adapter card that you recorded in Step 1 and

check the default value.

~ # esxcli system module parameters list -m lpfc | grep lpfc[0-1]_lun_queue_depth

lpfc0_lun_queue_depth int Max number of FCP commands we can queue to a specific LUN

lpfc1_lun_queue_depth int Max number of FCP commands we can queue to a specific LUN

[0-1] indicates that the number of ports is two.

4 Change the setting values of the parameter for the Converged Network Adapter card driver.

Driver parameter Setting value

lpfcX_lun_queue_depth Arbitrary (*1)

(Up to 512 for each FCoE port of the ETERNUS DX)

Chapter 1 Setup Procedure for Emulex Converged Network Adapter Cards

1.2 Setting Up the Converged Network Adapter Cards

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

(FCoE) for VMware

ESX

P3AM-4772-10ENZ0

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

Comentarios a estos manuales

Sin comentarios

Emulex ONECONNECT OCE10102-F Guía de usuario Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Emulex ONECONNECT OCE10102-F