Emulex 110 Guía de instalación descargar pdf (Pagina 161)

Fibre Channel over Ethernet (FCoE) Converged Network Adapter (CNA) procedures

161

Installation and Configuration

You need to key in the iSCSI Target Name, which is the desired

array's IQN name and iSCSI Target IP address as shown in

Figure 145.

Figure 145 Adding iSCSI Target

12. After you have completed all the setup and boot selections, press

Esc key to return to the Emulex OneConnect iSCSI Select

Utility page, as shown in Figure 137 on page 157.

13. To save all the configurations, use the Ta b key to select Save and

then press Esc.

14. You will be asked if you want to exit from the utility by pressing Y

or N. After you press Y, the system will reboot.

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 239 240

Sin comentarios

Emulex 110 Guía de instalación Pagina 161