Emulex 110 Guía de instalación descargar pdf (Pagina 37)

Booting from the external storage array

Installation and Configuration

5. Select Boot BIOS.

This displays the Change Boot BIOS State window (Figure 10).

Figure 10 Change Boot BIOS State window

6. Use the up/down arrow keys to select the adapter in the

Adapters box.

7. Use the tab key to highlight the BIOS Image box.

Use the up/down arrow keys to select the Boot BIOS image. Be

sure to choose the item called Boot BIOS enabled (or disabled).

8. Use the tab key to highlight the Change button, and then press

the spacebar. This toggles the boot BIOS image between enabled

and disabled.

9. Use the tab key to highlight OK, and press Enter.

10. Press Alt-F and select Exit to exit the lp6dutil.exe utility.

Upgrading ada pter firmware/BIOS on IA-64 class servers

adapter firmware/BIOS can be updated from the Windows operating

system using the utilities listed under “Updating the adapter

firmware using the HBAnyware utility” on page 109.

Firmware/BIOS for the adapter can also be updating using the

procedure beginning on page 47.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 239 240

Sin comentarios

Emulex 110 Guía de instalación Pagina 37