Emulex 110 Guía de instalación descargar pdf (Pagina 77)

Booting from the external storage array

Installation and Configuration

30. In the Selected Boot Device window (Figure 60 on page 76),

select the appropriate item and press Enter:

• In FC-SW environments, select 1 (Boot this device via

WWPN).

• In FC-AL/direct-attach environments, select 2 (Boot this

device via DID).

A window similar to Figure 61 appears.

Figure 61 Boot device identification

The utility reports the array port WWN and the LUN address (in

decimal) specified as the boot device.

31. The boot from array configuration is now complete. Press Esc to

exit from each menu screen until the utility is closed and you are

prompted: Action Required is Press [ENTER] to continue.

32. Press Enter twice to return to the EFI shell. The EFI shell can now

be exited, and the OS Installation can begin using the specified

array-based LUN as the boot volume.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 239 240

Sin comentarios

Emulex 110 Guía de instalación Pagina 77