Emulex 110 Guía de instalación descargar pdf (Pagina 190)

190

EMC Host Connecivity with Emulex Fibre Channel HBAs and CNAs in the Windows Environment

Miscellaneous Planning and Procedures

for driver software on your computer. Click the option Let me

pick from a list of device drivers on my computer. Continue

to Step 8.

8. In the next window, click Have Disk.

9. Enter the path to the diskette containing the driver (A:\, for

example), or use the browse function to locate the driver; then

click OK.

10. Select the appropriate driver for your adapter from the displayed

list and click Next.

Note: If you select the wrong driver, you will receive an Incompatible

Hardware warming message. Select No to cancel the update and return

to the selection windows, and then select the correct driver.

11. If prompted in the next window, click Next. (Windows 2008 may

not display this.)

12. If prompted, click Yes to continue the installation. (Windows 2008

may not display this.)

13. Click Finish to complete the installation.Windows 2008 will have

a Close button.

14. If the system requests that you reboot the system and you have

other adapters to update, select No and then click Close.

15. If the system again requests that you reboot the system and you

have other adapters to update, select No and then click Close.

16. If you have other adapters to update, select the next adapter

under SCSI & RAID Controllers and repeat Step 6 through

Step 15.

17. When all adapters have their drivers updated, select Yes to the

reboot prompt.

If you are not promoted to reboot, reboot your server anyway.

IMPORTANT

Failure to reboot before installing the Application Kit can

result in host blue screen error. You should also uninstall any

previous Application Kits before attempting to install the

Application Kit.

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 239 240

Sin comentarios

Emulex 110 Guía de instalación Pagina 190