Emulex 110 Guía de instalación descargar pdf (Pagina 51)

Booting from the external storage array

Installation and Configuration

5. The elxclinnnn.efi configuration support utility file must be

loaded in the EFI shell to configure the Emulex adapter. Type load

elxclinnnn.efi (where nnnn refers to the specific version

number present on your media) and press Enter.

In the example in Figure 27, the configuration support utility file

is named elxcli311a4.efi.

Figure 27 EFI boot configuration support utility

6. Emulex adapters can now be configured via the EFI shell. Type

drivers and press Enter to obtain a list of loaded drivers in the EFI

shell.

7. Make note of the first hexadecimal value listed on the line with

Emulex SCSI pass Thru Driver. In the example in Figure 28, the

driver handle is 8C.

Figure 28 Loaded drivers in the EFI shell

8. The EFI shell includes a driver configuration utility, accessed via

drvcfg, which configures supported drivers. To configure the

Emulex-specific driver, type drvcfg -s driverhandle (where

driverhandle refers to the driver handle listed for the Emulex

driver in the output of the drivers command, described above)

and press Enter. (In Figure 28 on page 51, the driver handle is 8C,

so the command entered is drvcfg -s 8C.)

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 239 240

Sin comentarios

Emulex 110 Guía de instalación Pagina 51